|
::
STC
/
STC Adhesive
 |
Call
us now!
Toll-free 877.795.9680
HABLAMOS ESPANOL -
FALAMOS PORTUGUÊS
|
Pressure Sensitive Mounting Adhesives
STC®
Pressure Sensitive Adhesives will meet any application
requirement when mounting prints to a variety of substrates.
These adhesives offer superior adhesion in several different
formulations to meet your specific mounting requirements.
General Purpose
Mounting Adhesive
A mounting
adhesive equipped with a moisture stable liner as well as a
rubber-based adhesive to insure the finished product is flat
and offers a permanent bond. The ideal adhesive for mounting
boards (gator, sintra, foamboard), posters, wide-format
digital prints and photographic prints to a wide variety of
substrates
Ultra White
Opaque Mounting Adhesive
Two-sided white adhesive designed for applications that
require mounting to thin media. The opaque backing
diminishes the effect of light as it shows through the
finished piece leaving a smooth and polished print.
Excellent for back lit applications and materials that are
especially sensitive to heat.
Economy Mounting Adhesive
A general purpose adhesive which permanently bonds to a wide
range of substrates. A cost-effective aggressive mounting
adhesive with a polyester carrier and protected by a single
moisture stable release liner.
Dual Mounting Adhesive Opaque White (Floor Graphics)
Offers a permanent adhesive on one side
and a removable adhesive on the other. The opaque finish
diminishes the effect of light important for trade show
graphics. Perfect for images that are intended to be removed
after a period of time, such as decals, signs and displays.
Dual Mounting Adhesive Clear (Floor Graphics)
Offers a permanent adhesive on one side
and a removable adhesive on the other. Ideal for floor
graphics and other images that are intended to be removed
after a period of time such as decals, signs, and displays.
Optically Clear UV Mounting Adhesive
Perfect for back lit applications when permanent mounting to
Plexiglas® and other substrates such as glass and
Lenticular Lens is desired. This double-sided mounting
adhesive has UV inhibitors that reduce the effects of
damaging rays. Permanent/permanent and permanent/removable
designed to easily remove from glass, plexiglass, and
acrylic sheet within six months of application.
STC
White Ultra Adhesive
Product Information
STC® White Ultra Adhesive is a double-sided tape
with a polypropylene film (opaque white) as
carrier material. It is excellent for back to back
banners, not allowing show through of type from the
opposite side. Your white remains bright white! It
is high quality, capable to block all mounting
board color , even when mounting thin prints.
STC® White Ultra Adhesive is economy priced, so you
may have this high quality as your “all purpose
everyday use” adhesive!
The permanent pure acrylic adhesive offers excellent
ageing, temperature and UV stability. Excellent
tack and high adhesion. High coating weight of
adhesive, therefore good adhesion on all smooth,
lightly rough or structured surfaces.
It is preferably used for the following
applications:
§
Application of
photos
§
digital prints
§
drawings
§
graphics on metal
§
composites
§
plastics
§
chipboards.
Adhesive
: Acrylic
Carrier
: Polypropylene film,3 mil, white
Liner
: PE silicone paper, white[61 lb]
Thickness
[mils] : 5
mils +/- 0.2
Temperature resistance
[°F] : -40 to +248
Adhesion [oz/in] AFERA 4001
68°F : 12.4 +/- 1.8
|
Dimensions |
Product No.
|
|
38.0" x 150 |
STCADH38150 |
|
51.0" x 150 |
STCADH51150 |
|
